496/555/565/572 BBC Rotating Assy - Forged Steel
-
496/555/565/572 BBC Rotating Assembly - Forged Steel
• Callies 5140 Forged Steel Crank (1 or 2 pc seal)
• Scat 4340 Forged Steel H-Beam rods. ARP Bolts
• JE 2618 Forged Full Round Dome or Flat Top Pistons
• JE Pro Ring set
• King Rod, Main Bearings & Cam Bearings
• Balanced neutral use 396/427 balancer & 350-427 flywheel
- $2,450.00 (Price subject to change and is based on availability.)
Multiple Product purchase discounts!! – Prices subject to change. – Product limited by availability
565 BBC Rotating Assembly - Sportsman
-
565 BBC Rotating Assembly - Sportsman
• J-E Pistons 40cm3 (14:1 with 118cm3 heads)
Full Round Piston. Heavy Duty Wrist Pins
• J-E Pro Series Rings, file fit Plasma Moly
(Tool Steel & Hellfire Optional)
• Manley 4340 H-Beam -.400 Long Rods w/ARP 2000 Bolts
(GRP Aluminum Option Available + $600)
• Dart 4340 Blower Keyed, Fully Counter-Weighted Crankshaft.
(Optional Callies Blower Keyed Magnum + $900)
• One-Piece or 2-Piece Rear Main Seal, Internally Balanced
• Michigan "H" Race Bearings
Total Rotating Assembly: $2,950
OPTIONS UPGRADES:
GRP Aluminum Rods +$600
Callies Blower Keyed Magnum Crankshaft +$900
540/555/565 Blower
-
BBC 540/555/565 Blower Motors (Unassembled kit)• 4.500/4.560/4.600 Bore x 9.800/10.2 Deck Sportsman Block• Pistons - JE Full Round 20cc Dish 1.270 Compression Distance• Rings - JE Pro Series Plasma Moly• Rods - Manley 6.385L ARP2000• Bearings - Michigan Rod/Michigan Main• Dart Block Kit(photo shown with options that are available but
not included in these kits)
- Callies Magnum Crankshaft total (Call for a free quote)
- Dart 4340 total (Call for a free quote)
- ________________________________________
- Dart BMP (Formerly World Products) & Brodix Blocks
- (Available for any of the above kits starting at $1950)
- (Price subject to change and is based on availability.)
565 BBC Blower Short Block
-
565 BBC Blower Short Block with Options
-
Rotating Assembly $2695
• Dart 4.250 Center Counter Weighted, Blower Keyed, 4340 Crankshaft
• Pistons - JE Full Round 20cc Dish 1.270 Compression Distance
• Rings - JE Pro Series Plasma Moly
• Rods - Manley 6.385L “H” Beam ARP2000
• Bearings - King Alecular
Block $2150 (If purchased with the Rotating Assembly)
• Dart 4.600 Bore x 9.800 Deck Sportsman Block ($2150 if purchased with the rotating assembly)
Block Accessory Kits $203
Dart Valley Lug Kit
Dart Small Parts & Cam Bearing Kit
Total Rotating Assembly, Block & Block Accessory Kits $5048
OPTIONAL ADDITIONS
Dart BMP (Formerly World Products) ADD + $2450
Dart Big M (Steel Main Caps) Upgrade ADD + $325
JE Blown Alcohol Pistons ADD + $135 & JE .017 Steel Dyke Rings ADD + $235
Callies Magnum Upgrade ADD + $1035
Manley Pro Series I Beam, ARP Bolts ADD + $825
Also available……..
-
Custom Mechanical & Hydraulic Roller Blower Camshafts & Lifters Available
-
Gear Drives & Pump Drives Also Available
Multiple Product purchase discounts!! – Prices subject to change. – Product limited by availability
BBC Premium Power-Add Rot. Assy.
-
BBC Premium Power-Adder Rotating Assembly - Big Cubes in Small Packages!• Inertia light crankshaft• Billet Pistons• 4.375in Stroke x 6.535in Rod. Aluminum Rods in a 9.8 Deck.• Piston CD 1.00 with .300 top land .180 second land(Proprietary pin/ring support for long rods in short decks.)Can be customized to fit your needs.Contact us for more details at 940.594.0350.
- Price: Call for details.
- (Price subject to change and is based on availability.)
Multiple Product purchase discounts!! – Prices subject to change. – Product limited by availability
565 BBC Super Street
-
Super Street Motors available by Raymac Racing Engines
- BBC 565
- 875HP Footbrake
- Good Idle Characteristics
- Brutal Bottom End Power and Torque
- Low Compression Small Camshaft
(Custom options available to fit your unique needs)
Contact us for more details.
- Price: Call of details 940.594.0350
- (Price subject to change and is based on availability.)
582 BBC Rotating Assembly - Power Adder
-
582 BBC Premium Rotating Assembly - Power Adder
-
Big Cubes in Small Packages!• Inertia light crankshaft• Billet Pistons• 4.375in Stroke x 6.535in Rod. Aluminum Rods in a 9.8 Deck.• Piston CD 1.00 with .300 top land .180 second land(Proprietary pin/ring support for long rods in short decks.)Can be customized to fit your needs.
Optional equipment shown.
- Total Rotating Assembly: $5,700.00
-
540 Street/Strip N20
-
496/540 Street/Strip N20 (Up to +350hp)$6050Rotating Assembly:• Callies 5140 4.250 Forged Steel - Crankshaft,Internally Balanced, Deep Studded Post• Manley 4340 H Beam, ARP 2000 Bolts• Wiseco 4.500 Bore, 1.270 C/D, 15cc Dome Pistons,11:1 Compression with 118cc.• JE 4.500 Bore, 1/16, 1/16, 3/16 Pro Series Moly Ring 4.500 Bore• King Alecular ¾ Groove Bearings• 4.500 x 1/16 “Hellfire” Top RingsBlock:• Dart Big M Sportsman 4.500 x 9.800• Dart Block Kit• ARP Head Studs• JE MLS 4.530 x .040 Head Gaskets• Avenger 320cc 2.250 x 1.880 Rectangle Port, Aluminum Head 118cc Chamber Hydraulic Roller .650 Lift--------------------------------------------------------------------------------------
NITROUS UPGRADES: (at this level 540, 555, 565 & 598 are all the same price. The 632 has an additional $400 for stroker clearance).HEAVY N20 (additional $2000)
• JE Nitrous Series Pistons up to 13.5:1 with 118cc
• .200 Wall 93s Pins
• Callies Magnum Crankshaft
• Dart Valley Lug Kit
______________________RECOMMENDED FOR HEAVY N20
• Also recommended Callies Ultra I Beam Rods (additional $1250)
or
• GRP Aluminum (additional $875)
______________________EXTREME USE N20 (additional $1250)
• Billet Cap Dart Block, ARP Main Studs, - Align Hone with Studs
• Receiver Groove Heads and O’Ring Block with
Copper Head Gaskets
(At this level we recommend our Dart & Brodix HD Castings)
Multiple Product purchase discounts!! – Prices subject to change. – Product limited by availability
632 BBC Short Block
-
632 Big Block Short Block (13.4:1 119cc)
PARTS Kit: $5655.00
JE Custom 13cc dome 2618 Forging, Double Pin Oilers,
180 Wall 52s Pin 043, 1/16 / 3/16 Rings
Rings 043 Steel Top Back cut to .170 Radial
1/16 D Wall Ductile Iron, 3/16 Low Tension Oil Ring
Manley Rods 6.700 ARP 2000 Bolts, 4340 H Beam
Block 4.600 x 10.2 Deck Big M Sportsman
Dart Crank 4.750 4340 Center Counterweight, blower keyed.
CNC Stroker Clearance
Dart Block Parts Kit
King Main Bearings
Michigan Clevite Rod Bearings H Series
LABOR: $955.00
Polish Crankshaft
Fit Pins in Pistons & Rods
Deck Block
Hone Block with Torque Plate and Valley Lugs
Final wash all parts for final assembly
Assembly: Fit individual bearings, install cam bearings, file fit rings, assemble short block.
TOTAL parts & labor: $6610.00
648/665 BBC Kit 1275HP
-
648/665 BBC Kit (1275 hp & 950 ft/lbs) $30,500
-
Callies Magnum Crankshaft (5in Stroke on 665) (4.875in Stroke on 648)
-
Brodix Aluminum Block 10.7 Deck
-
55mm Cam .842, HIP
-
GRP Aluminum Rods
-
JE Custom Pistons
-
Nitrited Steel Rings, Phosphate Coated
-
Custom Bullet 55mm 4-7 Swap Cam
-
Raised Cam Jesel Belt Drive
-
12 Degree Brodix Head Assembly
-
T&D Rocker Arms, Custom Ratios
-
Profiler Hitman Intake
-
2 x 4 or 1 x 4 Top
-
King Main Bearings CL77 Rod Bearings
-
Carb Linkage
-
Studs, Brodix Aluminum Block
-
(2) Quick Fuel 1150 Dominators
-
MLS Head Gasket
-
Morel Lifters
-
Pro Series Moroso Oil Pan, Billet Oil Pump
-
7/16 Pushrods
-
ATI Aluminum Balancer
-
Custom Intake Spacers
-
Fabricated Valve Covers
-
MSD Distributor & Wires
Optional: Titanium Valves +$800Call for more information.Office/Text 940.594.0350Shop/Dyno 817.705.5424
-
Multiple Product purchase discounts!! – Prices subject to change. – Product limited by availability
632 Big Chief Short Block Kit
-
632 Big Chief Short Block Kit availableby Raymac Racing Engines• Dart 10.2 Deck, 4.600 Bore, Sportsman Block• Manley 4340, 4.750, Center CounterWeight, Blower Keyed• Manley 4340 “H” Beam ARP 2000 Bolts• JE “Nitrous Series” 4.600, 13cc Pistons• JE HNS (Hardened Nitrous Series) Rings• CNC Stroker Clearancing• Precision Balanced• Torque Plate Honed Cylinders w/Valley Lugs• Decked• Washed• Professional Assembly, Bearing Clearance, Checked,• Rings file fitted and assembled.Total Parts: $6,750
540 All AL Long Block Kit
-
540 BBC ALL ALUMINUM Long Block Kit (Unassembled)
• BMP 4.500 Bore 9.8 Stroke ALUMINUM Block(BMP is Formerly World Products!!)• Callies 4.250” Stroke forged 5140 Crankshaft,Precision Internally Balanced• Wiseco 4.500 15cc Dome/Flat top, Forged Pistons11:1 / 9.2:1 Compressionw/118cc Heads• JE Sportsman Series Moly Forged Ductile Iron Ring Set• King Alecular ¾ Groove Rod & Main Bearings• King Cam Bearings• Avenger 320cc ALUMINUM Rectangle Port 2.250 x 1.880Steel Valved, Hydraulic RollerCylinder Heads w/Valley Head Bolts• JE MLS Head Gaskets 4.530 x 040• ARP Head Stud Kit• Dart Valley Lug Kit_____________________OPTIONS: Call 940.594.0350 for pricing)• Gear Cam Drive/Fuel Pump Drive• Jesel Belt Cam Drive• Double Roller Chain with Billet Gears & Roller Thrust Bearings• Callies Magnum Crankshaft• Bryant Crankshaft• Camshaft• Lifters• Oil System• Intake & Induction• Valvetrain• Roller Valve Springs• Ignition; Mag or Electronic• Valve Covers, Cast, Fabricated
565 Drag'n Slayer N2O
-
565 BBC Drag'n Slayer N2O Kit (Only 8 Available as of 1/29/18) (Up to 1700hp)
Block $2350 / Rotating Assembly $4895
• World Merlin Block, 9.8 Deck. 4.600 Bore, Steel Billet Main Caps, 55mm Cam & .904 Lifters
• Callies Magnum 4.25” Stroke, 4340 Forged Internal Balanced Crankshaft
• Manley (“Marine Duty” (+40 grams material in beam)) “I” Beam Rods, 4340 with ARP 2000 Bolts
• JE Forged 4.600 Bore, 1.120 C/D 30cc Dome (13.2:1 @ 115cc) HD Nitrous Pistons
• JE ProSeal Steel Nitrited .043 Ring Set
• King Alecular ¾ Groove, Rod & Main Bearings, Extra ClearanceHeads & Top End $4990
• Cometic MLS Head Gaskets
• ARP Head Studs
• Brodix Fully CNC’d BB-3 XTRA O 365, 2.350/1.800 Valves 365cc with Ports 115cc Chambers 460/313 cfm, .900 Lift
• Crane Gold Rocker Arms 1.8/1.7 Ratio
• Raymac Racing Engines Stud Girdle
• Trend Pushrods ⅜ .080 Wall 4130 Chrome Moly55mm Cam, Drive & Lifters $1599
• Custom Billet 55mm Camshaft, 4-7 Swap
• Morel, 904 Lifters, Mechanical Roller
• Double Tru Roller Timing Chain with 9 Position Steel Billet Gears, Roller Thrust
• Chrome GM Timing Chain CoverUse your 9.8 Deck Rectangle Port Intake & Carb, Ignition, Oil System & Make up to 1700 HP for
$7,245 Short Block Kit
$12,235 Long Block Kit
$13,834 Long Block with 55mm Cam & .904 Lifters KitOPTIONAL UPGRADES
• Head Hunter/Jesel Upgrade $1475
• Brodix Head Hunter 2.400/1.850 Valves 383cc
Intake Parts, 115 Chambers 482 cfm Intake 320 cfm Exhaust .900 Lift
• Jesel Shaft Rocker System
• GRP Aluminum Rods (No additional charge)
• Moroso, Stefs, Champ Oil Systems Available
• MSD, Holley, ATI at Unbelievable Prices
496 BBC Forged Power
496 BBC RACE Power Adder FORGED Assembly Kit
• Wiseco forged pistons 21cc dome or -3cc flat top
• Scat 4340 H beam rods ARP 8740 bolts
• Callies 5140 4.25 stroke crankshaft
• King high perf brgs
• JE pro seal rings
• Balanced
-
Total $2,173
747 BBC with Torque
-
747 BBC• Nitrous & Supercharged Compatible
• Built from extreme duty premium components
• When Big isn't Big Enough
• 825 ft/lbs @ 2,800 rpm
• 715 hp @ 5,000 rpm
• and YES HP Addicts..... This is an RV Cam - for drivability because Lord knows this is a lot of power. We can put a performance cam in it. The heads go over 370 cfm. It is capable of even more power, if you have the ability to hook it
;)
• With engine idle speed 675 rpm & pulls vacuum for your power brakes.
• On Pump Gas
• No Boost, No Nitrous, Low RPM Grunt
• Guaranteed to pass everything but the gas pump;)
• This sitting next to your Big Block, makes your Big Block look like a Small Block!!!These numbers are conservatively tuned.
Castings are in stock & ready to customize for your build.
Starting at $24,000 Dyno'd and Complete.
ONLY ONE AVAILABLE AT THIS PRICE.
632 Big Chief Long Block
-
632 Big Block Long Block Kit
(648, 665, 707, 732 & 747 kits also available)
+ Dart Pro 1 Big Chief 18 Degree Head,
Assembly, Roller Springs .900L
+ Dart Big M Sportsman Block, CNC Stroker Clearanced
+ Dart 4340, 4.750, Blower Snout, Center Counterweighted
Crankshaft, Internally Balanced
+ JE 15.6 : 1, 20cc Dome Pistons
+ JE Nitrited Steel Top Ring, Ring Set (N2O)
+ Manley H Beam 4340, ARP 2000 Bolts
+ Dart Cam bearings & parts kit
+ Dart Valley Lug Kit
+ ARP Head Studs
+ King Alecular Main & Clevite Rod Bearings
+ JE MLS Head Gaskets
Total: $9265.
We have oil system packages, valve train packages & induction packages and much more. Call for more details.
Optional Heads: 9, 11, 12 & 14 Degree Heads Available.
Out of the box flow ratings of up to 585 cfm. (With Optional Heads)
Brodix Aluminum Block $3280
632 BBC Pump Gas PowerHaus
-
632 BBC Pump Gas PowerHaus
Short Block Kit $4,450World 4.600 x 10.2 Deck Merlin IV 1pc Rear Main
Dart 4.750 Center Counterweighted 4340 Crankshaft, Internally Balanced 1pc Rear Main
Dart 4340 Forged I Beam Rods, ARP Rod Bolts
JE 4.600 Bore 1.120 Flat Top 2618 Forged Piston 10.7:1 Compression with 118cc Head
JE Pro Series Ring Set 1/16, 1/16, 3/16 Plasma Moly
Clevite H Series Rod and Main Bearings
Top End Kit $3,175
Aluminum Rectangle Port Heads 320 cc, 122 Chambers Hydraulic Roller
ARP 8740 Head Studs
JE MLS Head Gaskets
Crane “Gold” 1.7 Ratio Aluminum Rockers
Raymac Racing Engines Stud Girdle
Polished Cast Aluminum Tall Valve Covers
Valvetrain Kit $1,480
Custom 8620 Steel Mechanical/Hydraulic Roller Camshaft
Morel Retrofit Hydraulic Roller Lifters
Tru Roller, Steel Billet Geared, Roller Thrust Timing Chain, Lockplate, Button
Chrome GM Timing Cover
Trend Pushrods .080 wall
Oil System, Carburetor & Intake, Balancer & Accessories $2,775
Moroso 7quart Comp Eliminator Aluminum Oil Pan
Moroso High Volume Oil Pump & H/D Welded Pickup & Drive
MSD Distributor & Wires with Bronze Gear
Cast Aluminum Single Plane Intake Manifold
QuickFuel 950 cfm Carburetor
ATI Internal Balanced Balancer
Pan Gaskets, Intake Gaskets, Valve Cover Gaskets, Rear Main Seal, Plugs, Oil, Oil Filter Adaptor, Hardware, Dist. Hold Down, Balancer Bolt
Total Parts Kit: $11,880
-----------------------------------------------------------
OPTIONAL:
Bill Mitchell Products Aluminum Block +$2,150
632 BBC Block & Rotating Assy
-
BBC Power/Dependability/longevity....Rock Bottom Prices!
Block:• Dart Sportsman Block• CNC’d Stroker Clearance
• Prep, Final Hone, Deck, Wash & Install Cam
• CNC Stroker Clearance
• Cleaned & Prepped, Bagged, Ready for Assembly.
ONLY $2845Rotating Assembly:
• Dart Crankshaft .475 Center Counterweighted, Blower Keyed, Internally Balanced
• Manley Rods 6.700, ARP 2000 Rod Bolts
• JE Pistons 1.120, .470 Dome, 15.6:1 with 118cc Head, 40cc Dome
• JE Rings Pro Series
• King Bearings ¾ Groove Alecular
• Clean & Ready to Assemble
ONLY $2,778Block & Rotating Assembly purchased together: $5,500
UPGRADE TO ALUMINUM:
• A Ready to go Aluminum Block +$1555
540 Short Block Kit +Options
-
540 Short Block Kit - Plus Options - Educator & First Responder Special
BACK TO SCHOOL - EDUCATOR & FIRST
RESPONDER SPECIAL. 540 Street/Strip Short Block Kit - Plus Options***Block & Rotating Assembly (Short Block Kit) ONLY $4,073***
• World Merlin 9.8 Deck 4.500 Bore with Cam Bearings
& Small Parts Kit
• Wiseco Forged 4.500 Bore 11:1 Compression
(15cc Dome) Pistons
• JE ProSeal Ring Set
• Scat 6.385 L “H” Beam Rods, ARP 8740 Rod Bolts
• Callies 4.250 Compstar Forged Crankshaft
• King Alecular Rod & Main Bearings, Extra Clearance----------------------------------------------
OPTIONAL EXTRAS
----------------------------------------------
***Cam & Valvetrain $1,480***
• Custom Hydraulic Roller Camshaft with 2 Piece
Dist. Gear
• Morel Hydraulic Roller Lifters
• Steel Billet Geared, Double Tru Roller, 9 Position, Roller Thrust Timing Set
• Polished Aluminum Timing Cover
• Trend ⅜ Pushrods
• Crane “Gold” 1.7 Ratio Rocker Arms
• Tall Polished Aluminum Valve Covers***Oil System $410***
• Moroso Kick Out Oil Pan (Stock Cross Member)
• Moroso High Volume Oil Pump with Fully Welded H/D Pickup
• Moroso Hardened Oil Pump Driveshaft***Heads & Top End $2,470***
• Brodix Race Right BB-2X 2.250/1.880 Valves
Aluminum Heads
• Manley Head Bolt Set
• JE/Cometic MLS Head Gaskets
• Pro Products 4150 9.8 Deck Single Plane Intake Manifold***Induction & Ignition & Hardware $1,305***
• Holley Brawler 950 cfm Carburetor
• MSD Pro Distributor
• MSD 8.5mm Wire Set
• ATI Internal Balancer Harmonic Balancer***Hardware & Etc $230***
• Hardware, Oil Filter Adaptor, Oil Filter, Spark Plugs, Dist. Hold Down, Oil, Timing Cover Gasket, Internal Gasket, Oil Pan Gasket, Rear Main Seal, Balancer Bolt***Total of all parts listed: $9,968***
Raymac Racing Engines
RaymacRacingEngines.com
940.594.0350 Office/Text
817.705.5424 Shop/Dyno/No Voicemail
540 Pump Gas 650hp
-
Pump Gas 540 Performance Street Kit - 650HP
Block: $1950 (Only available at this price with this kit)
4.5 Bore x 9.8 Deck World Products Block
-
Rotating Assembly: $2073
Wiseco Pistons 4.500 Bore 1.270 F/Top
JE Pro Seal Moly Rings
Scat Rods, 4340 H Beam, 8740 Bolts
Callies Crank, Internally Balanced
King Alecular Bearings
Head Package: $1918
320cc Aluminum Rectangle Port, 2.250 x 1.880, 119cc Heads
ARP Head Studs
JE Head Gaskets, MLS, Stainless Steel
Polished Aluminum Valve Covers
Valve Train: $1422
Custom Comp Cams Hydraulic Roller Camshaft
Comp Cams Hydraulic Roller Retrofit Lifters
Trend Pushrods
Crane “Gold” Rocker Arms
Double Tru Roller, Billet Gears, Torrington Thrust Timing Chain, Lock Plate Button
GM Chrome Timing Cover
Oil System: $360
Moroso T Sump Pan
Moroso High Volume w/Weld Pickup Oil Pump & Driveshaft
Manifold: $320
Intake Manifold, Edelbrock RPM Performer Air Gap
Finish Out: $410
SFI Dampner, Balancer Bolt, Timing Cover Gasket, Oil Pan Set, Intake Gasket, Rear Main Seal, Valve Cover Gaskets, Spark Plugs, Pan, Intake & Timing Cover Hardware, Distributor Clamp, Oil Filter, Oil, Oil Filter Adaptor.
Labor: $1875
Hone Cylinders with Torque Plate
Install Cam Bearings - Paint Block
Disassemble heads, Lap & Check Spring Heights
Pin Fit Pistons & Rods
Polish Crank
Final Wash All Parts
Assemble: Individually fit bearings & rings, degree camshaft, check piston to valve clearance, check compression, professionally assemble.
Dyno & Tune
Kit Form (No Labor): $8,453
Kit Assembled & Dyno’d: $10,328
Optional Upgrades:
Quickfuel 850 +$495
MSD Distributor +$240
Moroso Wires +$65
ATI Dampner +$150
Mechanical Roller Cam, Comp Cams Roller, Lifters, PAC Springs, Stud Girdle +$480
540 Rot Assy Plus
-
540 Performance Rotating Assembly...... + Plus Block Options
540 Performance Rotating Assembly ONLY $2073
Raymac Racing Engines 540 Rotating Assembly Kit
• Wiseco Pistons 4.500 Bore, 1.270 15cc Dome, 11:1 w/118cc
• JE Pro Seal Moly Rings
• Scat Rods, 4340 "H" Beam, 8740 Bolts
• Callies Forged Crankshaft, Internally Balanced
• King Alecular Bearings
--------------------------------------------------------------+ Add a Cast Iron World Block + Rot Assy: $3850
• 4.5 Bore x 9.8 Cast Iron Deck World Products Block+ Add a Big M Dart Block + Rot Assy: ONLY $4000
(Block only available at this price with this kit.)+ Add a BMP (World) Aluminum Block + Rot Assy: ONLY $6600
(Block only available at this price with this kit.)--------------------------------------------------------------
ADDITIONAL OPTIONS/SUBSTITUTIONS AVAILABLE: Contact us at 940.594.0350 or 817.705.5424 to learn more.
Options 1) 537 cu in. JE Piston 4.625 42cc Dome. 4.00 in Stroke. 13.6:1 Comp. JE Rings Pro Seal Moly. Scat 4340, 4.00" Forged Crankshaft, Internally Balanced.
Option 2) 572 cu in. JE Piston 4.625 40cc Dome. 4.25 in Stroke. 14.0:1 Comp. JE Rings Pro Seal Moly.
Option 3) 588 cu in. JE 4.625 43cc Dome. 14.9:1 Comp. JE Rings, Steel, Nitrate Coated 043, 043, 3mm. Dart 4340 4.375" Stroke Crankshaft, Center Counterweighted, Blower Keyed, Internally Balanced
540 Pump Gas 810hp
-
Pump Gas 540 Performance Kit - 810HP by Raymac Racing Engines
• World Merlin 4 4.800 x 9.800 Block• Callies 5140 4.25, Internal Balanced Crankshaft• Rods, Scat 6.385 “H” Beam ARP 8740 Bolts, Rods• Wiseco 4.500 x 1.270, 15cc Dome Pistons• JE Ring Set 1/16, 1/16, 3/16 Rings• JE Head Gaskets, MLS .041 Thick• ARP Head Studs• 320cc CNC 355 cfm Heads• Bullet Custom Camshaft 4-7 Swap• Comp Cams High Pressure Oil Roller Lifters, Mechanical• Timing Chain, Thrust Bearing, Lock Plate• Chrome GM Timing Cover• Moroso Steel 8qt Stroker Drag Pan w/Tray• Moroso High Volume Pump w/Welded Pickup, Steel Drive Shaft• ATI Balancer Intake Balance, Balancer Bolt• Chrome “gold” rocker arms• Stud Girdle w/ Poly Locks• Polished Cast Aluminum Valve Covers• ProPower 4500 Rectangle Port Intake• Trend Pushrods 8.600/9.300• Plugs, Oil, Filter, Filter Adaptor, Intake, Pan, Timing Cover, Timing Cover Bolts, Clamp, Dist• Pan Gasket, Timing Cover Gasket, Intake Gasket, Valve Cover GasketsEngine Parts Kit: $8,702Labor:• Hone Cylinders Torque Plates & Valley Lugs• Deck Block• Pin Fit Pistons & Rods• Polish Crank & Cam• Check Heads, Lap Valves, Set Spring Heights• Wash All Parts, Final• Assemble, Complete; Fit Bearings, File Fit Rings, Degree Cam, Check Compression & Pistons to Valve Clearance. Build Book.• DynoLabor: $2,000Parts & Labor: $10,702ADDITIONAL OPTIONS:• Steel Main Caps Upgrade +$387• Dart 345 Upgrade +$1,350• ARP 2000 Bolt Upgrade +$118• Bill Mitchell Products (Merlin) Aluminum Block +$2120• 365cc CNC Heads 441cfm +$1000
632 BBC Street Race Rod Kit
-
BBC 632 Street Race Rod Short Block Kit by Raymac Racing Engines.
MK V & VI Replacement.
• Merlin Block 10.2 Deck, 4.600 Bore One Piece Rear Main
• Dart 4.750 Stroke 4340, Center Counterweighted, Blower Snout Crankshaft, Internally Balanced
• Manley 6.700” H Beam, 4340, Rods w/ARP 2000 Bolts
• JE Pistons 1.120 C/D 4.600 Bore. -3cc Flat Top 10.7:1 Compression w/118cc Head
• JE Pro Seal Rings 4.600 Bore, Moly Top Rings Standard Tension, 1/16, 1/16, 3/16
(15.1 w 72cc 12 Degree Big Chief Head)
• King Alecular Rod & Main Bearings$4959 (Kit Form)
OPTIONAL
BMP Aluminum Block + $1750
540 Powerplant July4th
-
540 Short Block Kit - Limited Supplies July 4th & Summer CLEARANCE SAVINGS
FIRST COME FIRST SERVE... Grab this one because it will be gone fast. Very limited quantity.540 Short Block Kit, 11.0:1 Compression
• World Merlin 10.2 Deck, 4.500 Bore,
1 Piece Rear Main Block
• Callies Compstar 4.250 Crankshaft, Internally Balanced
• Wiseco/Pro Tru 15cc Dome Forged Pistons
• JE Pro Seal Ring Set, 1/16, 1/16, 3/16 Plasma Moly
• Scat 6.800 4340 “H” Beam Rods
• King Alecular Rod & Main Bearings, Extra ClearanceOn SALE for only $3,850
--------------------------------------------------
FAQ on this kit:
1) To obtain 14.3:1 compression we would upgrade the pistons and then need to order the Plasma Moly 1/16, 1/16, 3/16 Rings which would then increase the cost by $432. The new total would be $4282.
2) We can upgrade from the Scat rods to Callies Compstar for a difference of $199.20 for a new total of $4049.20.
3) Comes with ARP 8740 bolts. ARP 2000s are optional for an additional $90.
Raymac Racing Engines
RaymacRacingEngines.com
940.594.0350 Office/Text
817.705.5424 Shop/Dyno/No Voicemail
632 BBC Mega 950HP
-
632 Mega Street 950hp by Raymac Racing Engines
Short Block Kit $5,590
World 4.600 x 10.2 Deck Merlin IV 1pc Rear Main
Dart 4.750 Center Counterweighted 4340 Crankshaft, Internally Balanced 1pc Rear Main
Manley 6.700 4340 H Beam Rod with ARP 2000 Bolts
JE 4.600 Bore 1.120 Flat Top 2618 Forged Piston 10.7:1 Compression with 118cc Head
JE Pro Series Ring Set1 1/16, 1/16, 3/16 Plasma Moly
Clevite H Series Rod and Main BearingsTop End Kit $3,975
Dart Pro1, 345cc, 121cc Chamber Aluminum Heads, 400cfm, 2.300/1.880
ARP 8740 Head Studs
JE MLS Head Gaskets
Crane “Gold” 1.7 Ratio Aluminum Rockers
Raymac Racing Engines Stud Girdle
Polished Cast Aluminum Tall Valve CoversValvetrain Kit $1,480
Custom 8620 Steel Mechanical Roller Cam
Comp Cams High Pressure Oiled Mechanical Lifters
Tru Roller, Steel Billet Geared, Roller Thrust Timing Chain, Lockplate, Button
Chrome GM Timing Cover
Trend Pushrods 8.600” Int 9.300” Exhaust ⅜ x.080 wallOil System, Carburetor & Intake, Balancer & Accessories $3,375
Moroso 7q Comp Eliminator Aluminum Oil Pan
Moroso High Volume Oil Pump & H/D Welded Pickup & Drive
MSD Distributor & Wires with Bronze Gear
Cast Aluminum Single Plane Intake Manifold
Quick Fuel 1150cfm Carburetor
ATI Internal Balanced Balancer
Pan Gaskets, Intake Gaskets, Valve Cover Gaskets, Rear Main Seal, Plugs, Oil, Oil Filter Adaptor, Hardware, Dist. Hold Down, Balancer BoltLabor $2310
Hone Cylinders with Torque Plate & Valley Lugs
Deck Block
Pin Fit Pistons & Rods
Polish Crankshaft
Disassemble Heads, Clean, Lap Valves, Set Heights, Reassemble
Final Wash All Parts
Assemble Complete Engine -
Individually Fit Bearings (Rod & Main), File Fit Rings, Degree Cam, Set Compression & Piston to Valve Clearance, Check/Set Stroker Clearance, Professionally Assemble Complete Engine
Dyno Test & TuneTotal Parts & Labor $16,630
-----------------------------------------------------------
OPTIONAL:
Bill Mitchell Products Aluminum Block +$2,100RaymacRacingEngines.com
940.549.0350 Office/Text
817.705.5424 Shop/Dyno - Price: Call of details 940.594.0350
- (Price subject to change and is based on availability.)
Multiple Product purchase discounts!! – Prices subject to change. – Product limited by availability
540 Short Block SALE
-
540 Short Block Kit 11.0:1 Compression (Street/Strip)
540 Short Block Kit, 11.0:1 Compression (Street/Strip)
• World Merlin 9.8 Deck, 4.500 Bore,
2 Piece Rear Main Block
• Callies GM Compstar 4.250 Stroke Crankshaft, Internally Balanced
• Wiseco/Pro Tru 4.500, 1.270 C/D, 15cc Dome Forged Pistons
• JE Pro Seal Ring Set, 1/16, 1/16, 3/16 Plasma Moly
• Scat 6.385" 4340 “H” Beam Rods
• King Race Duty Rod & Main Bearings, Extra ClearanceOn SALE for only $4821
Everyday Price... $5021
--------------------------------------------------
Find us at our Facebook Store by clicking here
583 BBC Kit 840HP
-
583 BBC Kit 735ft/lbs 840HP Street/Strip on Pump Gas/AV Gas
583 Cubic Inch +++ Ready to Assemble +++
735ft/lbs. 840hp Street/Strip - Pump Gas/AV Gas
What can you save @ $4.00/Gallon?(Pick only the parts and components you need)
---- Balanced Rotating Assembly $2950 ----
• Dart 4340 4 ⅜” Stroke Crankshaft, Center
Counter-Weighted, Blower Keyed. Internally Balanced.
• Wiseco/Protru 4.600 Bore, 1.215 C/D 4032 Forged
10cc Dome Piston 10.5:1 compression
• JE Pro Series Moly 1/16, 1/16, 3/16 Ring Set
• Manley 4340 H Beam Rods 6.386 Long, ARP 2000 Bolts
• King Alecular Rod & Main Bearings, Extra Clearance---- Block with Rotating Assembly $1950 (Not available separately at this price) ----
• World Merlin IV 4.600 Bore, 9.8 Deck Block
Ductile Caps, ARP Main Bolts, Cast Stroker Clearance
Small Parts Kit, Cam Bearings---- Heads & Top End $3742 ----
• Dart Pro1 345 Heads, Roller Springs up to .850 Lift , 400 cfm/Pair (Not available separately at this price)
• ARP Head Studs
• JE MLS Head Gaskets
• Crane Gold Rocker Arms
• Dart Stud Girdle with Poly Locks
• Polish Cast Aluminum Valve Covers---- Camshaft Lifters & Pushrods, Drive $1381 ----
• Camshaft, Custom Solid Roller for Low Compression
Comp Cams Sportsman .842 Solid Roller Lifters
• Trend 8.600 x 9.350 x ⅜” 1 Piece .080 Pushrods
• Double Tru-Roller, Steel Billet Geared, Torrington Thrust, 9 Position Timing Set with Lock plate & Roller Button
• Chrome GM Timing Cover---- Oil System $605 ----
• Moroso High Volume Oil Pump with High Pressure Spring & Fully Welded H/D Pickup and drive shaft
• Moroso 8” Drag Pan, 7qt, #21047, Lowered Partitioned Windage Tray---- Induction & Ignition, Balancer $2038 ----
• Intake Manifold Edelbrock 2907
• QuickFuel 1150 Dominator, Gas
• MSD 85531 Distributor
• MSD 8.5mm Wires
• ATI Balancer Neutral Balance---- Gaskets,Seals & Plugs $151.25 ----
• FelPro Rear Main Seal, Viton
• Mr Gasket Oil Pan Set - Stroker
• Mr Gasket Timing Cover Set
• Mr Gasket Intake Set
• Rubber Clad Metal Valve Cover Set
• NGR Spark Plugs 8---- Labor $570 ----
• Hone Cylinders with Torque Plate & Valley Lugs
• Final Wash, Debur, Chamfer, Install Cam Bearings
• Disassemble Heads, Mill .050 (11:1 compression)
• Lap Valves, Set Heights, Wash & ReassembleTotal Parts $12,832
Total Labor $570.00
_______________
11:1 compression 583 cu in BBC engine kit
Total Parts & Labor $ 13,402Shown with Optional Equipment
$700 less for a 540 Cubic InchRaymac Racing Engines
940.594.0350 Office/Text
817.705.5424 Shop/Dyno/No Voicemail
RaymacRacingEngines.com
565 BBC 900hp
-
BBC 565 900HP, 750 ft/lbs Power to 7800 rpm
565 BBC Kit Options (Fully Machined Version Included).....
KIT OPTION #1
Rotating Assembly $2273
• Callies Compstar 4.250 Stroke Internally Balanced
• Manley 6.535” H Beam Rods, 4340 ARP 2000 Bolts
• JE/SRP Forged 2618 4.600 Bore with 1.120 C/D 36cc Dome 13.0:1 with 118cc; 14:0:1 with 112cc
• JE Pro Seal Rings Plasma Moly 1/16, 1/16, 3/16 Low Tension
• King Alecular Rod & Main Bearings
Block (if Purchased with the Rot Assy) $2100
• Rotating Assembly & 9.8 Deck 4.600 Bore Merlin IV Block, ARP Main Bolts
Short Block Total (Block & Rot Assy) $4373
Top End Package (Heads at this price with Package only) Includes Short Block Kit and the following....
Total $7419
• Short Block Kit and the following:
• ARP Heads Studs
• JE MLS Head Gaskets
• Dart Pro 1 345’s Mechanical Roller .800 Lift Heads
ADDITIONAL OPTIONS:
• Pan & Pump Specials (Call for details)
• Cam Drive & Lifters Specials (Call for details)
______________________________________________
KIT OPTION #2 (Fully Machined)
Rotating Assembly $2273
• Callies Compstar 4.250 Stroke Internally Balanced
• Manley 6.535” H Beam Rods, 4340 ARP 2000 Bolts
• JE/SRP Forged 2618 4.600 Bore with 1.120 C/D 36cc Dome 13.0:1 with 118cc; 14:0:1 with 112cc
• JE Pro Seal Rings Plasma Moly 1/16, 1/16, 3/16 Low Tension
• King Alecular Rod & Main Bearings
Block (if purchased with the rotating assembly) $2100
• Dart Cast Cap Fully Machined (Nodular Iron) Grade 9 Bolts
Block Labor $600
• Deck, Hone, Chamfer Cylinders, Install Cam Bearings & Freeze Plugs, Final Wash, Bag and Small Parts Kit
Short Block Fully Machined (Block, Block Labor & Rot Assy) $4973
540/496 ProStreet/Strip
-
540/496 Pro Street / Strip Rotating Assembly, Short Block and Long Block Options by Raymac Racing Engines
540/496 Pro Street/Strip Rotating Assembly Kit $2073
• Callies 5140 Compstar 4.250” Stroke, Internally Balanced
• Wiseco/ProTru 4.280/4.310 Bore 21cc Pistons 11.1:1 Compression
• JE ProSeal Plasma Moly Ring Set 1/16, 1/16, 3/16
• Scat 4340 H Beam Rods with ARP 8740 Bolts
• King Alecular Aluminum Main Bearings, Extra Clearance
Optional Extras:
(Use your 454 Block for 496. 502 8.2L for 540)
(Dart & World Blocks available at a discounted rate with Rotating Assembly Purchase)
320cc Rectangle Port Aluminum Heads, Hydraulic Roller 360 cfm +$1500/pr
345cc Dart Heads (if purchased with Rot. Assy.) Hydraulic Roller 399/284 cfm +$2500/pr
JE/SRP 13.8:1 with 112cc, 43cc Piston Upgrade +$250
RaymacRacingEngines.com
940.594.0350 Office/Text - Mansfield, Texas
817.705.5424 Shop/Dyno/No Voicemail - Ft. Worth, Texas
555/565 Ready to Assemble Kit
-
BBC 555/565 Fully Clearanced & Machined Block & Rotating Assembly. Ready to Assemble
555/565 Fully Clearanced & Machined Block & Rotating Assembly. READY TO ASSEMBLE!!
Fully Machined Block:
• World Merlin IV Block
• Prep, Final Hone, Deck, Wash & Install Cam Bearings
• Cleaned & Prepped, Deburred, Bagged,
Ready for Assembly
Fully Machined Block $2,650 (w/Rotating Assembly Purchase)Rotating Assembly:
• Callies CompStar 4.25 Stroke, Internally Balanced
• Manley Rods 6.535, ARP 2000 Rod Bolts
• JE Pistons 1.120, .470 Dome, 14.0:1 with 118cc Head, 40cc Dome
• JE Rings Pro Series 1/16, 1/16, 3/16 Plasma Moly
• King Bearings ¾ Groove Alecular
Rotating Assembly $2,778Block & Rotating Assembly purchased together: $5,428
UPGRADE TO ALUMINUM:
• A Ready to go Aluminum Block +$1,900Raymac Racing Engines
RaymacRacingEngines.com
940.594.0350 Office/Text (Mansfield, Texas)
817.705.5424 Shop/Dyno/No Voicemail (Ft. Worth, Texas)
540 S/B Merlin III SALE
-
NEW 540 BBC Short Block Kit, 10.0:1 Compression
• World Merlin 3, 10.2 Deck, 4.500 Bore,
1 Piece Rear Main Block, Plus Small Parts Kit & Cam Bearings
• Callies Compstar 4.250 1-Piece Rear Main Crankshaft, Internally Balanced
• Wiseco/Pro Tru 6cc Dome Forged Pistons
• JE Pro Seal Ring Set, 1/16, 1/16, 3/16 Plasma Moly
• Scat 6.800 4340 “H” Beam Rods
• King Alecular Rod & Main Bearings, Extra ClearanceOn SALE for only $4100 (Free shipping inside the US)
TO HONOR OUR HEROS: TAKE AN ADDITIONAL $100 OFF FOR EDUCATORS, MILITARY & FIRST RESPONDERS
Ask about our amazing prices on
cylinder head packages and
valvetrain packages.This ad will be cross posted. First one to contact me at 940.594.0350 gets it. No holds.
540 Pump BLOWN
-
540 BLOWN APPLICATION 11 to 12:1 Compression Short Block by Raymac Racing Engines
Block $5875 (8 weeks) (if purchased with rot assy)
• Brodix Hipped ½ filled 10.2 Deck 4.500 Bare Block
(Option: for Dart Big M Subtract -$3425)
Rotating Assembly $4755
• Callies 4.250 Magnum Crankshaft, Internally Balanced
• GRP ProSeries Aluminum Rods
• JE Blown Alcohol Pistons 11 to 12 :1 Depending on Dome 22 or 30 cc’s
• JE ProSeal .017 Dykes Ring Set
• Clevite/King Extreme Duty Race Rod & Main Bearings
SHORT BLOCK $10,630
---------------------------
CONTACT us to learn more about
• Heads & Hardware
• Cam & Valve Train
• Oil System
• Accessories
• Labor
622 BBC All AL 1050HP
-
622 BBC All Aluminum (Conventional) 1050HP
(Ready to Assemble) Complete Engine Kit
-
Block & Rotating Assembly: $7115
BMP 4.500 x 10.200 Aluminum Block
Crankshaft Dart 4.750 Center Counterweighted, Blower Keyed, 4340
Manley Rods 6.700 H Beam ARP 2000 Bolts
Custom Pistons JE 15.5:1 Comp
JE Rings .043, 1/16, 3/16
Alecular Bearings King Mains, Clevite Rods
Camshaft & Drive: $1399
Comp Cams Pressure Oil Mechanical Roller Lifters
Bullet Custom Camshaft 4-7 Fire Order Swap
Tru Roller, Billet Geared, Torrington Thrust Timing Set w/ Roller Button, Lockplate
Chrome GM Timing Cover
ATI Balancer, Internal Balance & Balancer Bolt
Heads & Valvetrain: $7085
Dart 20 Degree, 440cc, 2.400/1.800, 97cc
T&D Rocker System
ARP Aluminum Block Head Studs
JE/Cometic MLS Head Gasket
Dart Fabricated Aluminum Valve Covers & Gaskets
Trend Push Rods
Intake & Carb: $1600
Profiler Snyper Internal 1x4
Quickfuel 1250
Oil System: $785
Oil System Moroso Fabricated Aluminum Oil Pan
Moroso High Volume Oil Pump
Ignition & Finish Out: $538
2 Wire Ring Distributor
Moroso Plug Wires
Plugs, Oil, Oil Filters, Oil Filter Adaptor, Pan Gasket, Intake Gasket, Internal Bolts,
Valve Cover Studs, Timing Cover Bolts, Valley Bolts
Labor: $550
Bore Block to 4.560
Stroker Clearance Block
Hone Block w/Plate
Wash & Install Cam Bearings
Total $19,072
-------------------------------------------
Additional Options:
• Snyper 2x4 Intake w/ Plate & Carb &
Linkage & ½ Spacers +$2030 (1100HP+)
• Manley Rods I Beam +$850
